Level 2 · Olfactory Training

Draw an Evaporation Curve for Your Palette

A practical exercise: smell materials on blotters at fixed times, score their strength and draw evaporation curves placing your palette from top to base.

In short

Every material leaves a blotter at its own pace. A citrus oil is mostly gone in an hour, linalool lasts a few hours, a woody material a day or more, and a musk for days. Knowing those paces for your own palette is what lets you predict how a formula will unfold before you weigh it. In this exercise you turn smelling into a chart: you score each material's strength at fixed times and draw its evaporation curve.

What you will learn

  • Score a material's strength on a blotter at fixed intervals
  • Draw and compare evaporation curves for several materials
  • Use the curves to place materials as top, heart or base

Before this lesson: How to Smell Raw Materials on a Strip, How Dilution Changes a Material's Character

Why a curve rather than a label

Lists sort materials into top, heart and base, but the boundaries are fuzzy and many materials change character as they dry. A curve shows both how long a material lasts and how its strength falls — steeply for a volatile top note, gently for a fixative — and comparing curves side by side shows which materials will carry an accord into the drydown and which will leave it. The background is in Perfume Volatility Explained and material tenacity on a blotter.

Setting up

  • Choose eight materials that span the range: a citrus oil, an aldehyde or ester, linalool, a rose alcohol, a floral heart material, a woody material, a resin or vanilla material, and a musk.
  • Use one dilution for all, usually 10% in ethanol, and dip every blotter to the same mark.
  • Label and date every blotter, and keep them in a clean, still, room-temperature place, apart from each other.
  • Fix the times: 1 minute, 15 minutes, 1 hour, 4 hours, 8 hours, 24 hours and 48 hours.

Scoring

At each time, smell each blotter and give it a strength score from 0 (nothing) to 5 (as strong as at the start). Write a two- or three-word note on its character too: "citrus, sharp", then "flat, waxy". Be consistent about distance and time per sniff, and rest between materials; fatigue lowers every score. If you can, ask a partner to score the same blotters independently and compare.

Drawing and reading the curves

Plot time along the bottom — a log scale (1 min, 15 min, 1 h, 4 h, 24 h, 48 h evenly spaced) keeps the short times readable — and strength up the side, one line per material. Then read them:

  • Curves that fall to near zero within an hour are your top notes.
  • Curves that hold for several hours and then fall are the heart.
  • Curves still above 2 at 24 hours are your base and fixatives.
  • Where a character note changes, mark it: those points explain how an accord shifts as it dries.

Compare your placements with the usual categories in top, middle and base notes; where they differ, trust your own record for your own materials.

Practical exercise: Exercise: curves for eight materials

About 60 minutes · You will have: evaporation curves for eight materials over 48 hours, with a top-heart-base placement for each

  1. Prepare 10% dilutions of eight materials spanning top to base.
  2. Dip and label eight blotters at the same moment.
  3. Score strength (0–5) and note character at 1 min, 15 min, 1 h, 4 h, 8 h, 24 h and 48 h.
  4. Plot all eight curves on one chart with a logarithmic time axis.
  5. Place each material as top, heart or base, and mark any change of character.

You have done this well if you have a chart with eight complete curves, each material is placed with a reason drawn from its curve, and you can name at least one material whose character changed over time.

Common mistakes

  • Different dilutions or dip depths. The curves then compare strength in the vial, not evaporation.
  • Blotters touching or stored together. They contaminate each other.
  • Scoring tired. Rest between materials and between sessions.

Safety

  • Work on blotters, never skin, and read each SDS first.
  • Keep ethanol dilutions away from heat and flame.

Key terms

Strength score
A 0–5 rating of how strong a blotter smells compared with its first minute, recorded at fixed times to draw an evaporation curve.

Knowledge check

1. Why are all materials dipped at the same dilution?
Show the answer

So differences in the curves reflect the materials, not their strength in the vial. Starting strength must be comparable for the curves to be comparable.

2. What does a curve that falls to almost nothing within an hour suggest?
Show the answer

A volatile top-note material. Fast-falling curves belong to volatile materials.

3. Why record character as well as strength?
Show the answer

Many materials change character as they evaporate. A natural can open citrus and dry down woody, which a strength score alone hides.

Written and reviewed by the RUŌOD Lab team. This is general education, not legal, regulatory, medical or safety advice. Example dilutions and exercises are for learning, are not validated products, and have not been safety-assessed. Completing a lesson confers no qualification. How we check these lessons.