In short
Perfumers read formulas by smell: they notice that "there is ionone in this" or "the citrus is gone". This drill trains that skill. You make simple blends with and without a target material, code them, and decide whether the target is present. Because one material can smell quite different inside a mixture than alone, the drill teaches you which facet gives each material away.
What you will learn
- Detect whether a material is present in a simple blend
- Name the facet that gives a material away in a mixture
- Record detection results honestly over repeated trials
Before this lesson: Blind Smelling Practice for Beginners
Why mixtures are hard
In a blend, odors mask, suppress and merge into one another; a material you know well alone may be unrecognizable together with others, and new impressions can emerge that none of the parts has. That is why accords work, and why this skill has to be practised rather than assumed. The way materials combine is introduced in fragrance accords explained.
Designing the trials
Choose three target materials with distinct characters, for example linalool (fresh floral), hexyl acetate (green pear) and beta-ionone (violet). Choose a simple background of two or three other materials. For each target, prepare:
- the background alone;
- the background with the target at a level you can just notice;
- a two-material, three-material and four-material version of the background, to raise the difficulty.
Use 10% dilutions and make every blend by weight, so the blends are repeatable. A partner codes the samples and keeps the key.
Scoring honestly
Present-or-absent questions can be guessed right half the time by chance, so one correct answer proves nothing. Run each comparison several times with fresh codes, and count the hits. Ten trials with eight or more correct is a much stronger result than one. If you want a stricter design, use a triangle arrangement — two samples the same, one different — as in the triangle test, where chance alone gives one in three.
What to write down
For each target, record not only whether you found it but how: "the violet edge at the end", "a green flash at the top". These clues are what you will use later when adjusting real formulas, and they often differ from how you would describe the material alone. Recognition practice in general is covered in Blind Smelling Practice.
Practical exercise: Drill: present or absent
- Choose three targets and a background of two to four materials.
- Prepare background-only and background-plus-target blends for each level of difficulty.
- Have a partner code the samples, and run ten present-or-absent trials per target at the easiest level.
- Record hits and the clue you used each time.
- Repeat at the harder levels, and note where your hit rate falls toward chance.
You have done this well if your records show hits for each target over ten coded trials, you can state the clue that gives each target away in a blend, and you have found the level of complexity at which you can no longer tell.
Common mistakes
- Counting one lucky guess. Use several trials.
- Targets that are too strong. The drill teaches more at levels you can only just notice.
- No rest. Fatigue makes everything smell the same.
Safety
- Work on strips and read each SDS before preparing the blends.
Key terms
- Detection trial
- A coded comparison in which you decide whether a target material is present in a blend.
Knowledge check
Written and reviewed by the RUŌOD Lab team. This is general education, not legal, regulatory, medical or safety advice. Example dilutions and exercises are for learning, are not validated products, and have not been safety-assessed. Completing a lesson confers no qualification. How we check these lessons.