In short
Strength changes a perfume more than most beginners expect. The same concentrate at a light strength may open brighter and wear closer; at a higher strength the base can dominate, the opening can feel heavier and the whole perfume can project differently. In this exercise you make one concentrate into three dilutions and compare them side by side, so you see exactly what strength alone does when the formula stays the same.
What you will learn
- Calculate concentrate and solvent for three target strengths
- Make three dilutions of one concentrate accurately by weight
- Describe how strength changes a perfume's opening, diffusion and drydown
Before this lesson: Perfume Dilution Basics: Make Your First 10%, Your First Weighing Practice
Choosing the strengths
Concentration names describe customary ranges rather than fixed legal values, and they differ between houses: an eau de toilette is often somewhere around 5–15% perfume oil, an eau de parfum around 15–20%, and an extrait higher still. For this exercise, choose three steps that are clearly apart — 8%, 15% and 22% work well — and note that they are your own labels. The wearer's view of the names is in the RUŌOD Journal's fragrance concentrations explained.
Calculating each dilution
For each strength, the mass of concentrate is the target percentage of the batch weight. For a 50 g batch:
- 8%: 4.0 g concentrate + 46.0 g ethanol
- 15%: 7.5 g concentrate + 42.5 g ethanol
- 22%: 11.0 g concentrate + 39.0 g ethanol
If your concentrate already contains solvent — for example, materials weighed as 10% dilutions — the active material is lower than the concentrate weight suggests; the difference is explained in how to calculate perfume concentration. For this exercise, use the same concentrate for all three, so the comparison stays fair.
Making and resting the dilutions
Weigh the concentrate first, then the ethanol, into clean, labelled bottles. Mix well. Let all three rest together for the same time — a few days at least, longer if you can — because perfume changes as it matures; see perfume maceration and aging. Comparing a fresh dilution with a matured one would mix two effects.
Comparing
Dip three blotters to the same mark and smell them at 1 minute, 15 minutes, 2 hours, 8 hours and 24 hours. For each strength, note the opening, which materials lead in the heart, how far the scent reaches from the blotter held at arm's length, and what remains the next day. You will often find that the ranking changes over time: the strongest dilution is not always the most pleasant in the first minutes. The method for turning one formula into several versions is in EDT and EDP versions of a formula.
Practical exercise: Bench work: the ladder
- Choose one concentrate — your own accord or a finished composition — and three strengths at least 6 percentage points apart.
- Calculate concentrate and ethanol for a 50 g batch of each, and check the arithmetic twice.
- Weigh the three dilutions, label them and let them rest together for the same period.
- Compare them on blotters at 1 minute, 15 minutes, 2 hours, 8 hours and 24 hours.
- Write which strength you would choose for a fresh daytime version and which for an evening version, and why.
You have done this well if your calculations are written down and correct, the three dilutions were weighed to within your balance's precision, and your comparison names at least two changes caused by strength alone.
Common mistakes
- Different resting times. Rest all three together.
- Weighing ethanol first into a tared bottle without recording it. Record every weight as you go.
- Judging only the opening. Differences in the drydown matter as much.
Safety
- Evaluate on blotters, never skin, and read each SDS before weighing.
- Keep ethanol and dilutions away from heat and flame, in closed, labelled bottles.
Key terms
- Concentration ladder
- A set of dilutions of one concentrate at increasing strengths, compared side by side to see what strength alone changes.
Knowledge check
Written and reviewed by the RUŌOD Lab team. This is general education, not legal, regulatory, medical or safety advice. Example dilutions and exercises are for learning, are not validated products, and have not been safety-assessed. Completing a lesson confers no qualification. How we check these lessons.