Materials & accords

How to Build a Tropical Fruit Accord

Mango, passion fruit, pineapple and guava from esters, lactones, peel notes and sulfur materials in parts per million, with an illustrative mango accord.

Listen to Article

Ready

Short answer

A tropical fruit accord suggests mango, passion fruit, pineapple or guava: juicy, sweet and often a little sulfurous, because the most realistic tropical notes contain sulfur compounds used in parts per million. It is built from fruity esters for juiciness, lactones for creaminess, a green or terpenic edge for the peel, and — handled with great care — sulfur-containing fruity materials that give the unmistakable tropical "funk". The skill is restraint: a trace of sulfur makes the fruit real; a little more makes it smell of onion.

The parts of a tropical fruit

The facets of a tropical fruit accord
FacetImpressionTypical materials
JuiceBright, sweet, fruityFruity esters such as ethyl butyrate, allyl hexanoate (pineapple), allyl cyclohexylpropionate
Cream and fleshPeachy, coconut, softgamma- and delta-lactones
Peel and greenTerpenic, resinous, slightly pineyA little citrus, terpenes, green notes
Tropical funkSulfurous, catty, blackcurrant-likeSulfur-containing fruity materials (thiols and related), in parts per million
SweetnessSugar, candyEthyl maltol, a little vanillin

The fruity esters and lactones are covered in fruity notes in perfumery and esters in perfumery. The encyclopedia has an entry for allyl cyclohexylpropionate.

Working with sulfur materials

Sulfur-containing odorants have extraordinarily low odor thresholds. Many are perceptible at concentrations far below a part per million, and their character changes with dilution: blackcurrant, grapefruit or passion fruit when very dilute, catty or onion-like when stronger. Practical rules:

  • Keep them as 0.1% or 0.01% dilutions, made by serial dilution, and weigh carefully (working with trace materials in a formula).
  • Use dedicated tools and keep the stock bottles sealed; their odor travels and contaminates.
  • Check each against the current IFRA Standards — several have restrictions — and your supplier's documentation.

An illustrative mango accord

Illustrative mango accord (invented for teaching, parts by weight; not tested by a perfumer or validated in a product — a starting point for your own trials)
MaterialParts
Hedione25
gamma-Decalactone, 10% in DPG20
Ethyl butyrate, 10% in ethanol10
Sweet orange oil10
Allyl cyclohexylpropionate, 10% in DPG8
A clean musk10
delta-Decalactone, 10% in DPG6
Ethyl maltol, 10% in DPG5
A pine or terpenic note (for example a little alpha-pinene)3
A tropical sulfur material, 0.01% in DPG3

Allyl esters are covered by an IFRA Standard on free allyl alcohol, and sweet orange contributes limonene, a declarable allergen. Check every material for your product (how to check IFRA limits).

Variations

  • Pineapple — raise allyl hexanoate and allyl cyclohexylpropionate; reduce lactones.
  • Passion fruit — more sulfur character, more sourness from citrus; fewer lactones.
  • Coconut — more lactone, especially coconut-like gamma-nonalactone; drop sulfur.
  • Guava — add a green, slightly musty note and more sulfur.

Balancing it

  • Onion or sweat: the sulfur is too high. Halve it, and halve it again.
  • Candy: reduce ethyl maltol and esters; add green and peel.
  • Sunscreen: lactones dominate; reduce them.

Tropical accords take their place among fruit accords in the guide to perfume materials by odor family.

Testing the accord

Because sulfur materials change character with dilution, test the accord at the strength it will have in the finished product, not only as a concentrate. Make the perfume at its intended dose, rest it, and smell it on skin and on a strip. If the concentrate smells of onion but the finished perfume smells of fruit, the dose may be right; judge the product, not the bottle of accord. Keep a record of each sulfur dilution's age, since these materials can change on storage. Wear-test only a finished formula that you have checked against the IFRA Standards for a leave-on skin product; until then, use strips and cotton.

Sources

  • IFRA — IFRA Standards (including allyl esters); check every material in the accord.

Frequently asked questions

Why do tropical fruit notes smell of sulfur?

Many tropical fruits owe part of their aroma to sulfur compounds. In tiny amounts they read as fruit; in larger amounts as onion or sweat.

How much sulfur material should I use?

Traces only — often parts per million in the finished product. Start lower than you think.

Can I make a tropical accord without sulfur materials?

Yes, with esters, lactones and peel notes, but it will read more like candy than fresh fruit.

Written and reviewed by the RUŌOD Lab team. This article is general education about perfume formulation and record-keeping; it is not legal, regulatory or safety advice, and the examples are illustrations, not validated commercial formulas. How we write and check these guides.

Formulate with the arithmetic done for you

RUŌOD Lab tags every material with families and a pyramid position, and reports what a library smells of.