Materials & accords

How to Build a Smoke Accord: Birch, Cade and Guaiacol

Guaiacol, rectified birch tar or cade, resins and dry woods make campfire, incense or pipe smoke. Materials, styles, handling and an illustrative accord.

Listen to Article

Ready

Short answer

A smoke accord recreates the smell of something burning — a wood fire, a smouldering incense stick, a smoked tea or a burnt-out candle — from materials that carry phenolic, tarry and roasted notes. Its core is usually guaiacol and related phenols, rectified birch tar or cade oil, and a woody base; around them, resins, leather and dry woods decide whether the smoke reads as a campfire, a church or a library. Smoke is one of the strongest effects in perfumery, and the whole skill is restraint.

What smoke is, in molecules

When wood burns, its lignin breaks down into phenols — guaiacol, cresols, syringol and their relatives — which give the sharp, medicinal, smoky-sweet smell of a fire. Burning also produces roasted, caramelised and tarry notes. Perfumers use the same molecules, isolated or synthesised, together with materials made by heating wood in the absence of air, such as birch tar and cade oil. The phenol family is introduced in perfume chemistry basics.

The building blocks

Materials of a smoke accord
RoleImpressionTypical materials
Phenolic smokeCampfire, smoked meat, medicinalGuaiacol, 4-methylguaiacol, creosol, isobutyl quinoline (traces)
TarDark, leathery, burnt woodRectified birch tar, rectified cade oil
Resin smokeIncense, churchFrankincense, styrax, labdanum, olibanum resinoid
Dry woodCharred, ashyCedarwood, vetiver, guaiacwood, cypriol
Sweet smokePipe, smoked teaVanillin, a trace of tobacco absolute, lapsang-style notes

Guaiacwood is covered in guaiacwood in perfumery, and the resins in incense and resins in perfumery.

Birch tar and cade: use the rectified grades

Crude tars made by heating wood contain polycyclic aromatic hydrocarbons, a family that includes known carcinogens. Perfumery therefore uses rectified birch tar and cade oils, purified to remove them, and the IFRA Standards Library covers these tar materials. Ask your supplier for the IFRA certificate for the grade you buy, and read the current standard for it. Birch tar is also the classic source of Russian leather; see the leather accord.

An illustrative campfire smoke accord

Illustrative campfire smoke accord (invented for teaching, parts by weight; not tested by a perfumer or validated in a product — a starting point for your own trials)
MaterialParts
Cedarwood oil (Virginia)35
Vetiver oil15
Guaiacwood oil15
Labdanum absolute, 10% in DPG12
Rectified birch tar, 10% in DPG8
Frankincense oil6
Guaiacol, 1% in DPG5
Vanillin, 10% in ethanol4

Check every material against the IFRA Standards for your product (how to check IFRA limits). Phenols and tars can stain and can darken a product; test before using them in a clear or white base (perfume stability testing).

Styles and how to move between them

  • Campfire — dry woods, phenols, a little tar.
  • Church incense — less tar and phenol, more frankincense and resin.
  • Smoked tea — a trace of smoke over a tea and leaf accord.
  • Pipe and leather — tar, tobacco and vanilla; see the tobacco accord.
  • Burnt sugar — smoke with caramel and maltol for a gourmand.

Balancing it

  • Medicinal or "bandage": guaiacol or cresols too high; reduce and add resin.
  • Tarry and dirty: birch tar too high; it is powerful at very low levels.
  • Smoke disappears: phenols are fairly volatile; support them with tar, labdanum and woods.

Handling

Smoke materials cling to strips, skin, glassware and benches. Keep them apart, use dedicated pipettes, and smell them last in a session — they make everything after them smell smoky. See preventing cross-contamination in a perfume lab.

Smoke belongs with the woods and resins in the guide to perfume materials by odor family. The RUŌOD Journal describes leathery perfumes, smoke's close relative, for wearers in leather fragrances.

Testing the accord

Put the accord at 1%, 5% and 10% into a simple woody base and smell each at 10 minutes and 3 hours. Most wearers find smoke at a lower level than the perfumer expects; the 1% version may already be enough.

Sources

Frequently asked questions

What gives perfume a smoky smell?

Phenols such as guaiacol, rectified birch tar or cade, and smoky resins and woods.

Why rectified birch tar?

Crude tar contains polycyclic aromatic hydrocarbons; rectified grades are purified to remove them. Check the IFRA certificate for your grade.

How much smoke should I use?

Less than you think. Test at several levels in the finished base.

Written and reviewed by the RUŌOD Lab team. This article is general education about perfume formulation and record-keeping; it is not legal, regulatory or safety advice, and the examples are illustrations, not validated commercial formulas. How we write and check these guides.

Formulate with the arithmetic done for you

RUŌOD Lab tags every material with families and a pyramid position, and reports what a library smells of.