Materials & accords

How to Build a Mineral Accord: Stone, Flint and Chalk

Stone barely smells, so a mineral accord is an abstraction: Ambroxide salinity, chalky salicylates, aldehydic sparkle and cool woods. An illustrative accord.

Listen to Article

Ready

Short answer

A mineral accord suggests stone — dry flint, chalk, warm rock or wet pebbles — in a perfume. Stone has almost no smell of its own, so the accord is an abstraction built from materials that read as cool, dry, saline or chalky: Ambroxide's dry salinity, aldehydic and metallic sparkle, chalky salicylates and powdery notes, clean musks, and cool woods such as Iso E Super. It is a modern effect, used to make florals and woods feel airy, urban and less sweet.

Stone, flint and chalk

Different stones suggest different structures:

Mineral impressions and how they are built
ImpressionCharacterTypical materials
Flint, struck stoneDry, slightly smoky, sparklingAldehydes in traces, a hint of smoke, Ambroxide
ChalkPowdery, dry, whiteSalicylates, ionones, a clean musk
Salt and sea rockSaline, coolAmbroxide, a marine note
Wet stoneCool, damp, faintly earthyA marine or ozonic note, a trace of earthy material
Warm rockDry, sun-warmedIso E Super, Cashmeran, a trace of resin

The smell of rain on dry ground — petrichor — is its own accord, with geosmin and wet-earth notes; see the rain accord. The RUŌOD Journal explains mineral perfumes to wearers in mineral fragrances.

An illustrative dry stone accord

Illustrative dry stone accord (invented for teaching, parts by weight; not tested by a perfumer or validated in a product — a starting point for your own trials)
MaterialParts
Iso E Super30
Hedione20
A clean macrocyclic musk15
Hexyl salicylate10
Ambroxide, 10% in ethanol10
Cashmeran5
alpha-Isomethyl ionone4
Aldehyde C11 undecylenic, 10% in DPG3
Calone, 1% in DPG3

Salicylates, ionones and other materials here have IFRA Standards or labeling requirements; check them for your product (how to check IFRA limits). The salicylates' chalky dryness is discussed in salicylates in perfumery; Ambroxide's in Ambroxide in perfumery.

Balancing it

  • Too soapy: aldehydes and musks dominate. Reduce them; add dry wood.
  • Too marine: Calone is strong; it should be a cool trace.
  • Too sweet: ionones and musks can sweeten; reduce them and raise Ambroxide.
  • Not "stone" enough: raise salicylate and Ambroxide together, and add a metallic touch (metallic accord).

Using it

A mineral accord works as a layer rather than a theme: under a floral, it removes sweetness and adds air; under woods, it adds a cool, dry modernity; with citrus and herbs, it suggests sun on rocks. It is closely related to the metallic and rain effects, and many perfumes combine them. As a premix, a few percent to 15% of a concentrate is usually enough (perfume premix calculation).

An evaluation exercise

  1. Smell Ambroxide, hexyl salicylate, Iso E Super and aldehyde C11 at 10% (C11 at 1%).
  2. Describe each in mineral terms: salt, chalk, warm stone, sparkle.
  3. Blend the accord and add it at 10% to a simple rose; compare blind with the rose alone.

Mineral effects take their place among the accords in the guide to perfume materials by odor family.

Testing the accord

  1. Add the accord at 5%, 10% and 15% to the same simple floral or woody base.
  2. Smell the series blind and ask testers to describe the difference. "Fresher", "cooler", "less sweet" and "airy" mean it is working; "soapy" or "marine" mean it needs adjusting.
  3. Wear the best version on skin for a day; the salty-dry facet often becomes clearer in the drydown. Wear-test only a finished formula that you have checked against the IFRA Standards for a leave-on skin product; until then, use strips and cotton.

Record the base, the dose and the testers' words for each step, so the best level can be reproduced in the final formula.

Sources

Frequently asked questions

Does stone have a smell?

Very little. A mineral accord is an abstraction made from materials that read as dry, cool, saline or chalky.

Is a mineral accord the same as petrichor?

No. Petrichor, the smell of rain on dry earth, is built with geosmin and wet-earth notes; a mineral accord is dry stone, flint or chalk.

Which material is most "mineral"?

Ambroxide's dry salinity and the salicylates' chalkiness do most of the work.

Written and reviewed by the RUŌOD Lab team. This article is general education about perfume formulation and record-keeping; it is not legal, regulatory or safety advice, and the examples are illustrations, not validated commercial formulas. How we write and check these guides.

Formulate with the arithmetic done for you

RUŌOD Lab tags every material with families and a pyramid position, and reports what a library smells of.