Materials & accords

How to Build a Coffee Accord

Roasted coffee comes from 2-furfurylthiol, pyrazines, phenols and caramel notes. How to build espresso, mocha or café au lait, with an illustrative accord.

Listen to Article

Ready

Short answer

A coffee accord recreates the smell of roasted coffee — dark, roasted and bitter-sweet, with a sulfurous "fresh brew" edge, nutty and caramel notes and a woody depth — from roasted and nutty materials, a trace of a coffee-specific sulfur compound and a warm base. A coffee CO2 extract or absolute gives the most natural result but fades and varies; an accord built around it, or without it, makes the note last and repeat. Coffee is a gourmand note that is easy to make smell burnt or stale and difficult to make smell freshly ground.

What coffee smells like, in molecules

Roasted coffee contains hundreds of volatile compounds, but sensory studies point to a small number that matter most. In work on roasted arabica coffee, 2-furfurylthiol (the roasty, coffee-like sulfur note), 4-vinylguaiacol (spicy, smoky-sweet), several alkylpyrazines (nutty, roasted, earthy), furanones (caramel) and some aldehydes had the greatest impact on the aroma. Those are the families a perfumer works with:

  • Sulfur — the immediate "coffee" signal. Extremely strong; used at traces.
  • Pyrazines — roasted, nutty, cocoa-like.
  • Phenols — smoky, spicy depth from the roast.
  • Caramel — furanones and maltol-type sweetness.

The building blocks

Materials of a coffee accord
FacetImpressionTypical materials
Coffee itselfNatural, roundedCoffee CO2 extract or absolute
Fresh brewRoasty, sulfurous2-Furfurylthiol (at extreme dilution)
RoastNutty, earthy, roastedAlkylpyrazines, a trace of guaiacol
SweetnessCaramel, mochaEthyl maltol, furaneol, vanillin
DepthDark, woodyPatchouli, cedarwood, a dry amber

Ethyl maltol is covered in ethyl maltol in perfumery and vanillin in vanillin in perfumery.

An illustrative espresso accord

Illustrative espresso accord (invented for teaching, parts by weight; not tested by a perfumer or validated in a product — a starting point for your own trials)
MaterialParts
Coffee CO2 extract, 10% in ethanol30
Patchouli oil15
Vanillin, 10% in ethanol15
Cedarwood oil (Virginia)15
Ethyl maltol, 10% in DPG10
2,3,5-Trimethylpyrazine, 1% in DPG8
Guaiacol, 1% in DPG4
2-Furfurylthiol, 0.01% in DPG3

Check every material against the IFRA Standards for your product (how to check IFRA limits). Vanillin and maltols can discolor a product; test it (perfume stability testing).

Handling sulfur and pyrazines

  • Dilute in steps. 2-Furfurylthiol has an extremely low odour threshold. Make a 1% dilution, then dilute that again, and weigh the most dilute one into the formula. See how to dilute aroma chemicals.
  • It changes over time. In brewed coffee, 2-furfurylthiol is lost quickly as it binds to other compounds; in a perfume it can also fade or turn. Smell the accord after a few weeks of maturation, not only on the day.
  • Keep them apart. Sulfur compounds and pyrazines contaminate glassware and the room; use dedicated pipettes and seal containers well. See preventing cross-contamination.

Styles

  • Espresso — dark, roasted, bitter; more pyrazine and patchouli.
  • Café au lait — softer, with lactones and a milky musk.
  • Mocha — coffee with a cocoa accord; see the chocolate accord.
  • Coffee and spice — cardamom, as in Arabic coffee; see spicy notes in perfumery.

Balancing it

  • Burnt: too much guaiacol or pyrazine; reduce and add sweetness.
  • Stale, like old grounds: sulfur too high or aged; reduce it and refresh with the CO2 extract.
  • Sweet but not coffee: the roast is missing; add pyrazine in small steps.

Coffee belongs with the gourmand materials in the guide to perfume materials by odor family; see also the gourmand accord. The RUŌOD Journal explains gourmand perfumes to wearers in gourmand fragrances.

Testing the accord

Smell the accord beside freshly ground coffee in a closed jar. Then smell both again an hour later: the real coffee will have dulled too, which is a useful reminder that "fresh brew" is the hardest facet to keep.

Sources

  • Czerny M., Mayer F., Grosch W., "Sensory study on the character impact odorants of roasted arabica coffee", Journal of Agricultural and Food Chemistry (1999).
  • PubChem — 2-furfurylthiol (2-furanmethanethiol).

Frequently asked questions

What molecule smells like coffee?

2-Furfurylthiol gives the roasty coffee signal; pyrazines, phenols and caramel notes complete it.

Can I use coffee beans in perfume?

A tincture of ground coffee is possible but weak and variable; a CO2 extract is more practical.

Why does my coffee accord smell burnt?

Phenols or pyrazines are too high. Reduce them and add sweetness and wood.

Written and reviewed by the RUŌOD Lab team. This article is general education about perfume formulation and record-keeping; it is not legal, regulatory or safety advice, and the examples are illustrations, not validated commercial formulas. How we write and check these guides.

Formulate with the arithmetic done for you

RUŌOD Lab tags every material with families and a pyramid position, and reports what a library smells of.